Amico Cut 50hf 50 Amp Non Touch Pilot Arc Plasma

Amico CUT-50HF, 50 Amp Non-touch Pilot Arc Plasma Cutter, 95~260V Professional Cutting Machine

Category : Tools
Brand : AmicoPower
Features
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico CUT-50HF, 50 Amp Non-touch Pilot Arc Plasma Cutter, 100-250V Wide Voltage, 3/5 in. Clean Cut Cutting

    Category : Tools
    Brand : AmicoPower
    Features
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico CUT-50HF, 50 Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage, 3/5 in. Clean Cut Cutting Machine

    Category : Tools
    Brand : AmicoPower
    Features
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico CUT-50HF, 50 Amp Non-touch Pilot Arc Plasma Cutter, Pro. 100-250V Wide Voltage, 3/5 in. Clean Cut Cutting Machine

    Category : Tools
    Brand : AmicoPower
    Features
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico CUT-50HF 50Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage, 3/5 in. Clean Cut Cutting Machine

    Category : Tools
    Brand : AmicoPower
    Features
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico APC-50HF, 50 Amp Non-touch Pilot Arc Air Plasma Cutter, 100-250V Wide Voltage Cutting Machine, 4/5 inch Clean Cut

    Category : Tools
    Brand : AmicoPower
    Features
  • APC-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • APC-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • APC-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • APC-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico CUT-50HF, 50-Amp Non-touch Pilot Arc Plasma Cutter, 100V-250V Wide Voltage, 3/5 in. Clean Cut DC Inverter Cutting Machine

    Category : Tools
    Brand : AmicoPower
    Features
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico CUT-50HF, 50 Amp Non-touch Pilot Arc Air Plasma Cutter, Professional 3/5 inch Clean Cut, 100-250V Wide Voltage Cutting Machine.

    Category : Tools
    Brand : AmicoPower
    Features
  • Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
  • Can cut up to 3/5 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • 100-250V wide voltage, 50/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
  • Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.

    • AP80-48, 80-120 Amp Non-touch Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-40HF/50HF/60HF/70HF/80HF

    Category : Tools
    Brand : AmicoPower
    Features
  • AMICO Power Designed Professional Pilot Arc Consumables Set. After thousands of experiments and practical use, the set maintains the best performance of the plasma torch.
  • Can be used in high frequency contact 80-120A following up of air plasma arc cutting machine series products. High-frequency air plasma is suitable for various brands of 80-120A following cutting machine.
  • Electrodes and shunts are made of rare metals, such as chromium, which can withstand extremely high temperatures and has strong durability; the duration is five times longer than other products, making it extremely suited for professional cutting.
  • Bakelite cups use the highest quality and highest temperature resistant materials of professional production. With high mechanical strength, good insulation, heat and corrosion resistance, and explosion-proof, this product is extremely safe to use.
  • Plasma cutter torch roller guide uses high-temperature resistant material for the most professional customer. The production process is very delicate, and the wheel positioning is very reasonable and lubrication, making it the most high-end product all other roller guides.

    • Amico CHF-40, 40 Amp Pilot Arc Non-touch Plasma Cutter, 3/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

    Category : Tools
    Brand : AmicoPower
    Features
  • Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
  • Can cut up to 3/5 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • 115-Volt and 230-Volt dual voltage, 50Hz/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
  • Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.

    • Amico CHF-60, 60 Amp Plasma Cutter, Non-touch, Pilot Arc, 7/8 in. Clean Cut, 120/240V Dual Voltage Cutting Machine.

    Category : Tools
    Brand : AmicoPower
    Features
  • Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
  • Can cut up to 7/8 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • 115-Volt and 230-Volt dual voltage, 50Hz/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
  • Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.

    • Amico CUT-60HF, 60 Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage, 4/5 in. Clean Cut Cutting Machine

    Category : Tools
    Brand : AmicoPower
    Features
  • CUT-60HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • CUT-60HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.0 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • CUT-60HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-60HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico APC-60HF, 60 Amp Non-touch Pilot Arc Air Plasma Cutter, 100-250V Wide Voltage Cutting Machine, 1.0 inch Clean Cut

    Category : Tools
    Brand : AmicoPower
    Features
  • APC-60HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • APC-60HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.0 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • APC-60HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • APC-60HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

    • Amico AP80-48, 80-120 Amp Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-70HF

    Category : Tools
    Brand : AmicoPower
    Features
  • AMICO Power Designed Professional Pilot Arc Consumables Set. After tens of thousands of times experiment and practical use, determined to maintain the best performance of the plasma torch.
  • Can be used in high frequency contact 80-120A following up of air plasma arc cutting machine series products, high-frequency air plasma is suitable for various brands of 80-120A following cutting machine.
  • Electrode and shunts made of very rare metal – chromium, can withstand extremely high temperatures, has strong durability, the duration is five times longer than other products, extremely suited for professional cutting.
  • Bakelite cup use the high quality, high temperature resistant material of professional production, with high mechanical strength, good insulation, heat resistance and corrosion resistance, also has the function of explosion-proof, very safe.
  • Plasma cutter torch roller guide use high temperature resistant material professional custom, production process is very delicate, wheel positioning is very reasonable and lubrication, Is the most high-end products all other roller guide.

    • Amico CHF-60, 60 Amp Professional Pilot Arc Plasma Cutter, 7/8 in. Clean Cut, 110/230V Dual Voltage Cutting.

    Category : Tools
    Brand : AmicoPower
    Features
  • Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
  • Can cut up to 7/8 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • 115-Volt and 230-Volt dual voltage, 50Hz/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
  • Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.

    • Pilot Arc Plasma Cutter, Cuwiny 50 Amp Dual Voltage 110/220v Non-Touch Pilot Inverter Air Plasma Cutting Machine, IGBT,14mm Clean Cut,16mm Max Severance, Fit For Carbon Steel,Copper, Iron and Aluminum

    Category : Tools
    Brand : Cuwiny
    Features
  • PILOT AIR PLASMA CUTTER: Suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. It is high frequency arc starting plasma cutter. Uses non-hazardous compressed air to cut, safe and at low cost.We offer 30-Day 100% satisfaction or money back guarantee and 1 year limited warranty.
  • NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 5/8” maximum severance cut under 220/240V. 10-35A DC output, 2/5" ideal clean cut and 1/2" maximum severance cut under 110/120V.
  • DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).Air Pressure 0.4-0.7MPa. Duty Cycle: 60%. Max Current: 50 Amp. IGBT Advanced Inverter Plasma Technology. Automatic indicate the voltage no need to switch by handle from 110v to 220v. Better use 63Amps power breaker for this machine. Cutting machine come with NPT 1/4’’ air connector, very quick to connect machine to air compressor.
  • AIR REGULATOR and HIGHT QUALITY ACCESSORIES: Our plasma cutters use a better air regulator and are equipped with a plastic tape, which is the best air regulator on the all market. They solve a very distressing problem of other products on the market: the regulator can't get air pressure. We offer a full range of quality accessories and AG60P pilot arc torch, work with standard parts, you easy to find the consumables from our Cuwiny shop.

    • Amico CUT50-G50, 50 pcs Plasma Cutter Consumables Nozzles, Electrodes and Cups for AMICO CUT-50 APC-50 & CTS-200

    Category : Tools
    Brand : AmicoPower
    Features
  • AMICO Power designed professional consumables set for models CUT-50/60 APC-50/60 and CTS-200.
  • High quality 60 Amp (SG-55/AG-60) plasma cutter torch consumables.
  • CUT50-G50 has strong durability; the duration is five times longer than other products.
  • It can also withstand extremely high temperatures, making it extremely suited for professional cutting.
  • 20 pieces torch nozzles, 20 pieces torch electrodes, 10 pieces ceramic shield cups, Total 50 piece of consumables.

    • Amico CUT50-G50, 50-Pcs Plasma Cutter Consumables Nozzles, Electrodes and Cups for AMICO CUT-50 APC-50 & CTS-200

    Category : Tools
    Brand : AmicoPower
    Features
  • AMICO Power designed professional consumables set for models CUT-50/60 APC-50/60 CTS-200 and CUT-45M/55M.
  • High quality 60 Amp (SG-55/AG-60) plasma cutter torch consumables.
  • CUT50-G50 has strong durability; the duration is five times longer than other products.
  • It can also withstand extremely high temperatures, making it extremely suited for professional cutting.
  • 20 pieces torch nozzles, 20 pieces torch electrodes, 10 pieces ceramic shield cups, Total 50 piece of consumables.

    • Amico CUT50-G100, 100-Pcs Plasma Cutter Consumables Nozzles, Electrodes and Cups for AMICO CUT-50 APC-50 & CTS-200

    Category : Tools
    Brand : AmicoPower
    Features
  • AMICO Power designed professional consumables set for models CUT-50/60 APC-50/60 and CTS-200.
  • High quality 60 Amp (SG-55/AG-60) plasma cutter torch consumables.
  • CUT50-G100 has strong durability; the duration is five times longer than other products.
  • It can also withstand extremely high temperatures, making it extremely suited for professional cutting.
  • 40 pieces torch nozzles, 40 pieces torch electrodes, 20 pieces ceramic shield cups, Total 50 piece of consumables.

    • P-80 Pilot Arc Plasma Cutting Torch, Air Plasma Cutter Non-touch Straigh Machine Torch For Pilot Arc Plasma Cutter … (5M)

    Category : Tools
    Brand : Tosense
    Features
  • ✅The P-80 High Frequency AIR Plasma Cutter Torch cutting 40MM thick plate unde
  • ✅Can be used in high frequency contact 50A-120A following up of air plasma arc cutting machine series products, high-frequency air plasma is suitable for various brands of 50A-120A following cutting machine.
  • ✅The Brand of Machine would be Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan, Tonsense and so on
  • ✅These torches for Plasma cutting machines such as CUT-50, CUT-100
  • ✅It can efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; the technology allows you to cut without touching the tip to the metal. It provides a better cutting quality and longer consumable life.